This 30-inch under-cabinet stainless steel range hood delivers a slim, low-profile fit (29.9" W x 17.5" D x 4.7" H). I keep cabinet clearance intact while still improving day-to-day ventilation. The hood pushes 280 CFM airflow and runs on simple rocker-button controls that feel familiar and dependable. It also supports ducted or ductless conversion with top or rear venting options, adds a 2-speed fan and LED lighting, and uses a multi-layer filtration setup to handle grease and odors.
Key takeaways
- Slim stainless steel build with standard 30" sizing and a 17.5" depth, so I cover front burners better without a bulky look
- 280 CFM airflow with 2 fan speeds that work well for light-to-moderate smoke and odor control
- Rocker button controls that keep operation straightforward and reliable, with no touch menus to fight
- Convertible installation: ducted via 7" top vent, a rear vent option, or ductless recirculation with carbon filtration
- Maintenance and install notes: I rinse the aluminum mesh regularly, replace the carbon filter every 3–4 months (Part# ZMS-3976-F), and plan for hardwiring plus a junction box
Slim, Space-Saving Fit and Modern Look
This 30-inch under-cabinet range hood keeps a low profile, so you can preserve cabinet clearance while still getting a clean focal line above the cooktop. The slim stainless steel body blends with most appliances, and the brushed finish hides small smudges better than glossy surfaces.
Fit notes I rely on before buying
I check key measurements first so installation stays simple:
- Overall size: 29.9" W x 17.5" D x 4.7" H, which often matches standard 30" cabinet runs.
- Depth: 17.5" helps cover front burners without looking bulky.
- Style match: brushed stainless pairs easily with a slim induction cooktop.
Check current pricing and availability at Amazon here!
Range Hood 30 inch Under Cabinet, Stainless Steel Kitchen Vent Hood 280CFM, Built-in Kitchen Stove Hood w/Rocker Button Control, Ducted/Ductless Convertible Duct, 2 Speeds Fan, Bright LED Light
This image is property of Amazon.com.
Everyday Ventilation Performance
I get practical, day-to-day airflow here without fiddly controls. The hood moves 280 CFM and uses two fan speeds, so I can match ventilation to what’s on the stove. Rocker buttons keep operation simple, and I don’t have to stop cooking to figure out a touch panel.
What I notice in daily use
A few performance points stand out during typical meals:
- 280 CFM airflow clears light-to-moderate smoke fast, especially for sautéing, simmering, and pan-frying.
- Two speeds help me stay efficient: low for background ventilation, high when onions, bacon, or searing starts to kick up odor.
- Noise stays comfortable. The 55 dB rating lines up with what many users call quiet, so I can still talk in the kitchen.
- Controls feel reliable. Rocker switches give instant feedback, which I prefer over menus.
I also like pairing kitchen upgrades logically; if I’m swapping appliances, I’ll sometimes plan around a slim induction cooktop to keep the whole setup streamlined.
Check current pricing and availability at Amazon here!
Range Hood 30 inch Under Cabinet, Stainless Steel Kitchen Vent Hood 280CFM, Built-in Kitchen Stove Hood w/Rocker Button Control, Ducted/Ductless Convertible Duct, 2 Speeds Fan, Bright LED Light
This image is property of Amazon.com.
Convertible Vented Options: Ducted or Ductless
I like that this hood gives me real installation flexibility. I can run it ducted through a 7-inch top vent for strong exhaust, or use the rectangular rear vent when cabinets or wall studs make a top run awkward. I also treat this as a clean fit with nearby appliances like a 30-inch ceramic cooktop.
How I choose the right mode
I use these quick rules to decide:
- Ducted: best for heavy searing and frequent frying.
- Rear vent: helpful when I can’t route a vertical duct cleanly.
- Ductless: works when I have no exterior duct; it recirculates through the included aluminum mesh + activated carbon cotton composite filter to cut odors.
Check current pricing and availability at Amazon here!
Range Hood 30 inch Under Cabinet, Stainless Steel Kitchen Vent Hood 280CFM, Built-in Kitchen Stove Hood w/Rocker Button Control, Ducted/Ductless Convertible Duct, 2 Speeds Fan, Bright LED Light
This image is property of Amazon.com.
Filters and LED Lighting (with a Brightness Note)
What I’d do for cleaner air and practical lighting
This hood runs a 3-layer grease filtration setup: an aluminum mesh filter plus an activated carbon cotton composite to catch grease and cut odors. I’d stick to the suggested 3–4 month swap cycle for the replacement filter (Part# ZMS-3976-F), since performance drops fast once carbon loads up. I also like pairing it with a clean-cooking surface like this 30-inch electric cooktop to reduce heavy smoke in the first place.
For day-to-day use, I’d keep these habits:
- Rinse the aluminum mesh regularly to prevent airflow loss.
- Replace the carbon filter on schedule for odor control.
The 2W LED gets mixed feedback on brightness, so I treat it as task-adjacent, not primary.
Check current pricing and availability at Amazon here!
Range Hood 30 inch Under Cabinet, Stainless Steel Kitchen Vent Hood 280CFM, Built-in Kitchen Stove Hood w/Rocker Button Control, Ducted/Ductless Convertible Duct, 2 Speeds Fan, Bright LED Light
This image is property of Amazon.com.
Installation Notes Before You Buy
I like this hood because the physical mounting stays straightforward for most kitchens, but the electrical side needs planning. This is a hardwire unit, so I treat it like any other fixed-appliance hookup and line up parts before the hood arrives.
What to buy and prep
A quick checklist keeps install day smooth:
- Plan for hardwiring. I shut off the breaker, confirm the circuit, and leave enough slack to make clean connections.
- Add a plug only if I truly need one. The plug is sold separately as Part# ZMS-3976-PC, so I order it in advance when an outlet connection makes sense.
- Pick up a junction box. The package doesn’t include one, and I won’t wire a hood without a proper box and cover for safe, code-friendly connections.
Practical fit tips
I measure cabinet cutouts and the duct route early, even if I plan to run it ductless. Clean alignment matters, so I locate studs or add backing for solid support. If the kitchen already has an outlet in the right spot, I still confirm it won’t interfere with the hood body.
I keep other appliances staged too, like a compact mini fridge with freezer, so the work zone stays functional during install.
Check current pricing and availability at Amazon here!
Range Hood 30 inch Under Cabinet, Stainless Steel Kitchen Vent Hood 280CFM, Built-in Kitchen Stove Hood w/Rocker Button Control, Ducted/Ductless Convertible Duct, 2 Speeds Fan, Bright LED Light
This image is property of Amazon.com.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
From Fort Collins, Colorado. Meal-prep maximalist and spreadsheet enjoyer. Focused on organization, efficiency, and not letting lettuce liquefy in two days.
